Whirlpool S20E RWW2V-A/G Manuel utilisateur

PDF
Document
Whirlpool S20E RWW2V-A/G Manuel utilisateur | Fixfr
/

User questions

Y S

James Y.

What do an active alarm and flashing digits indicate?

No votes

An active alarm and flashing digits (or dashes instead of temperature), accompanied by an audible alarm and a red indicator light, can correspond to several situations described in the consulted document:

  • Initial startup: If the appliance has just been plugged in or after a period of inactivity, the display shows two dashes until the optimal temperature is reached. You can deactivate the audible signal by pressing the reset button.
  • Temperature alarm: This triggers if the freezer compartment is not at the correct temperature (e.g., door left open too long or excessive amount of food to freeze).
  • Power cut alarm: If a prolonged power cut has caused the internal temperature to rise, the freezer display will show the maximum temperature reached, flashing. Press the reset button to restore the programmed temperature display.
  • Open door warning: If a door has been open for more than 2 minutes, an audible signal triggers, and the door symbol flashes.
Y S

James Y.

What do the alarm and flashing digits mean?

No votes

The flashing or display of dashes instead of temperature, accompanied by an audible alarm and a red indicator light, can indicate several situations: - Initial startup: The device displays two dashes until the optimal temperature is reached. The audible signal can be deactivated with the reset button. - Temperature alarm: Triggers if the freezer compartment is not at the correct temperature (e.g., door left open too long, excessive amount of food to freeze). - Power outage alarm: If a long-term power outage caused the internal temperature to rise, the freezer display will show the maximum temperature reached, flashing. Press the reset button to restore the programmed temperature display. - Door open signal: An audible signal sounds and the door symbol flashes if a door has been open for more than 2 minutes.

Y S

James Y.

What do an active alarm and flashing digits indicate?

No votes

An active alarm along with flashing digits or dashes instead of the temperature, accompanied by a red light, can indicate several situations:

  • Initial startup: If the appliance has just been plugged in or after a period of inactivity, dashes are displayed until the optimal temperature is reached. The audible signal can be deactivated by pressing the reset button.
  • Temperature alarm: This alarm triggers if the freezer compartment is not at the correct temperature (e.g., door left open too long or excessive amount of food to freeze).
  • Power cut alarm: If a long power cut caused the internal temperature to rise, the freezer display will show the maximum temperature reached, flashing. Press the reset button to restore the programmed temperature display.
  • Open door signal: If a door has been left open for more than 2 minutes, an audible signal triggers and the door symbol flashes.
Y S

James Y.

What causes the alarm and flashing display on the freezer?

No votes

This may indicate initial start-up before reaching optimal temperature, a temperature alarm (door open or overload), a power cut, or a door left open for more than 2 minutes.

Preparing document for printing…
0%