Domyos T900A Manuel utilisateur

PDF
Document
Domyos T900A Manuel utilisateur | Fixfr
/

User questions

W H

Robert W.

What checks should be performed if a treadmill does not start after the safety key is inserted?

No votes

Verify that the power cord is securely plugged into both the wall outlet and the device. Ensure the main switch on the frame is in the 'I' position. Confirm that the safety key is fully seated in its slot on the console. If an extension cord is used, it must not exceed 1.5 meters in length.

W H

Robert W.

What should be checked if a treadmill fails to start despite the safety key being inserted?

No votes

Ensure the power cord is securely plugged into both the wall outlet and the device. Verify that the main power switch on the frame is in the 'I' position. Confirm that the safety key is fully inserted into its slot on the console. If an extension cord is used, it must not exceed 1.5 meters in length.

W H

Robert W.

How to troubleshoot a treadmill that does not start despite the safety key being inserted?

No votes

Ensure the power cord is securely plugged into both the wall outlet and the device. Verify that the main switch on the frame is in the 'I' position and confirm the safety key is fully inserted into the console slot. If using an extension cord, ensure it does not exceed 1.5 meters.

W H

Robert W.

How to troubleshoot a treadmill that does not start despite the safety key being inserted?

No votes

Ensure the power cord is securely plugged into the wall outlet and the back of the treadmill. Verify that the main switch on the frame is in the 'I' position. Confirm that the safety key is fully inserted into its slot on the console. If an extension cord is used, it should not exceed 1.5 meters in length.

W H

Robert W.

How to troubleshoot a treadmill that does not start when the safety key is inserted?

No votes

Verify that the power cord is properly connected to both the wall outlet and the device, ensure the main switch is in the 'I' position, and confirm that the safety key is fully inserted into its slot.

W H

Robert W.

How to troubleshoot a treadmill that does not start when the safety key is inserted?

No votes

To troubleshoot a treadmill that does not start when the safety key is inserted, check the following points:

  • Ensure the power cord is securely plugged into both the wall outlet and the back of the treadmill.
  • Verify that the main switch, located near the cord on the frame, is in the « I » position.
  • Make sure the safety key is fully inserted into its slot on the console.
  • If using an extension cord, ensure it does not exceed 1.5 meters.
W H

Robert W.

How to troubleshoot a treadmill that does not start despite the safety key being inserted?

No votes

Ensure the power cord is securely plugged into both the wall outlet and the device. Verify that the main switch on the frame is in the 'I' position. Ensure the safety key is fully inserted into its slot on the console. If an extension cord is used, it must not exceed 1.5 meters.

W H

Robert W.

What should be checked if the treadmill does not start even after the safety key is inserted?

No votes

If the treadmill does not start despite the safety key being inserted, verify the following: ensure the power cord is securely plugged into both the wall outlet and the back of the treadmill (test the outlet with another device); check that the main switch located on the frame near the cord is in the “I” position; confirm that the safety key is "fully inserted" into its designated slot on the console; and if an extension cord is used, ensure it does not exceed 1.5 m.

W H

Robert W.

How to troubleshoot a treadmill that does not start despite the safety key being inserted?

No votes

Verify that the power cord is securely plugged into both the wall outlet and the device, and that the main switch on the frame is set to the 'I' position. Ensure the safety key is fully inserted into its slot on the console. If using an extension cord, ensure it does not exceed 1.5 meters.

Q W

Patricia Q.

How to check the total operating hours of the treadmill?

No votes

To check the total operating hours of the treadmill:

  1. Press and hold the settings button (gear or selection icon) while inserting the safety key.
  2. Screen 1 will appear (for KM/MI units). Press the validation button to proceed.
  3. Screen 2 displays the total distance covered.
  4. Press the validation button again to access Screen 3, which shows the total operating hours of the treadmill. You can exit this menu anytime by pressing the STOP button to return to the 'GO' screen. Note: The treadmill is designed for limited domestic use, up to 5 hours per week.
Q W

Patricia Q.

How to check the total operating hours of the treadmill?

No votes

Pour consulter le nombre total d'heures de fonctionnement du tapis de course, accédez aux écrans de paramètres de la console. Procédez comme suit : 1. Maintenez appuyé le bouton de paramétrage (représenté par une icône de roue dentée ou de sélection) tout en insérant la clé de sécurité. 2. L'Écran 1 s'affiche (pour modifier les unités KM/MI). Appuyez sur le bouton de validation pour passer à l'écran suivant. 3. L'Écran 2 affiche la distance totale parcourue. 4. Appuyez une nouvelle fois sur le bouton de validation pour accéder à l'Écran 3, qui affiche le nombre total d’heures de fonctionnement du tapis de course. Vous pouvez quitter ce menu à tout moment pour revenir à l'écran « GO » en appuyant sur le bouton STOP. Cet appareil est conçu pour une utilisation domestique limitée à 5 heures par semaine.

Preparing document for printing…
0%