EXCELINE EX-RA4 CLIMATISEURS Manuel utilisateur

PDF
Document
EXCELINE EX-RA4 CLIMATISEURS Manuel utilisateur | Fixfr
/

User questions

N Q

John N.

Why was the product sold with a key?

The document does not mention a key being supplied with the product. It is possible a different accessory was included or there was an error in packaging. Without specific device information, providing a precise answer is difficult. Check the packaging and contents to ensure all components are present.

W C

Robert W.

How to completely remove the water tray if it is connected by cables or hoses?

The instructions do not specify a method for completely detaching the water reservoir if it is held by cables or hoses. Forcing removal risks damaging the device or causing a leak. Instead, check if water can be poured directly into the accessible opening without forcing the cables.

W C

Robert W.

Can the water tray be filled while it is partially open or still connected to the device?

No, filling the reservoir while it is partially open or still connected to the device via cables or hoses presents a significant risk of spilling water onto internal electrical components, which can cause electrocution or damage to the device. The instructions indicate that the reservoir must be removed for filling.

W C

Robert W.

How should the water tray be emptied after use?

The water reservoir should be emptied after each use. If the reservoir cannot be fully removed, empty the water carefully, avoiding any contact with electrical parts and internal cables. Wipe away any excess water with a soft cloth.

W C

Robert W.

What should be done if internal cables or hoses are fixed within the water tray and would come into contact with water during use?

If internal components like electrical cables or hoses are fixed within the water tray and would be in direct contact with water, this presents a severe risk of electrocution. The device should not be used under these conditions, as it deviates from safe operating procedures.

W C

Robert W.

What should be done if the device exhibits a design anomaly or malfunction, such as electrical components being exposed to water?

If the device presents a malfunction or a design anomaly (e.g., electrical cables in contact with water), it is strongly advised not to use it.

W C

Robert W.

How to handle the water tank for filling and cleaning if it is tethered by internal cables or hoses?

If the water tank is tethered by cables or hoses, do not attempt to remove it completely. Open the tank as far as possible without force to fill or clean it. Ensure no water comes into contact with electrical components or internal wiring. If cables or connections appear to be submerged in water or exposed in an unsafe manner, do not use the device to avoid the risk of electrocution.

W C

Robert W.

How to safely handle, fill, and clean the water tank?

Fill the tank with clear water, ensuring no contact with internal cables or electrical components to avoid electric shock. After use, empty the tank, remove any residue or plugs from the drainage orifice if available, and wipe away excess water with a soft cloth. Do not force the tank if it appears to be held by internal connections.

Preparing document for printing…
0%