Valberg LV 60 cm 13S44 A++ W205T LAVE-VAISSELLE Manuel utilisateur

To set the water softening system of your dishwasher, follow these steps:

1. After determining your water hardness level with the provided strip, turn on the machine.
2. Press and hold the Time Delay (Départ différé) and Programme buttons simultaneously for 3 seconds to access the Settings menu.
3. Press the Programme button until the salt indicator (a specific icon on your control panel that warns when the reservoir needs filling) flashes.
4. Use the Time Delay button to adjust the hardness level (from 0 to 5) according to the setting table in the manual. If you only see options like P1 or P3, it indicates you are in the interior lighting menu; ensure the salt indicator is flashing before using the Time Delay button for hardness adjustment.
5. Press the On/Off button to save your configuration. The Time Delay button (identified as 4 and 10 on the device diagram) serves to schedule programs or adjust parameters like water hardness in the settings menu. If you only see 0 to 3 hours with the Time Delay button, that refers to the wash programming function, not the water hardness setting; ensure you've properly entered the settings menu as described in step 2.

To adjust the water softening system of your Valberg dishwasher:

1. After determining your water hardness level with the provided strip, turn on the machine.
2. Press the Time Delay (Départ différé) and Program buttons simultaneously for 3 seconds to access the Settings menu. (The Time Delay button is identified by numbers 4 and 10 on the control panel diagram and is also used for program scheduling).
3. Press the Program button until the salt indicator (a specific symbol on the screen, different from lighting options like P1/P3) flashes. If you see "P1" or "P3", you are in the interior lighting menu and must restart from step 2.
4. Use the Time Delay button to adjust the hardness level (from 0 to 5) according to the settings table provided. If you only encounter options from 0 to 3 hours, this corresponds to program scheduling and not water hardness adjustment; in this case, ensure that the salt indicator is flashing.
5. Press the On/Off button to save your configuration. Note that if your water is soft (below 13 °dF), salt is not necessary.

To adjust the water softening system (water hardness) on your Valberg dishwasher, follow these steps:

1. First, determine your water's hardness level using the provided test strip.
2. Turn on the machine.
3. Press and hold the Time Delay and Programme buttons simultaneously for 3 seconds to access the Settings menu.
4. Press the Programme button repeatedly until the salt indicator (a specific icon on the display) flashes.
5. Once the salt indicator flashes, use the Time Delay button to adjust the hardness level (from 0 to 5, according to the adjustment table in the manual).
6. Press the On/Off button to save your configuration. *Note: If your water is soft (below 13 °dF), using salt is not necessary. *The Time Delay button can also be used to schedule program deferrals (e.g., 3, 6, or 9 hours), but for water hardness, it is used within the settings menu.

To adjust the water softening system and water hardness level on your Valberg dishwasher, please follow these precise steps described in the manual:

1. After determining your water hardness with the provided test strip, turn on the machine.
2. Press and hold the Time Delay (also known as "Départ différé") and Programme buttons simultaneously for 3 seconds to enter the Settings menu. The Time Delay button is identified by numbers 4 and 10 on the appliance diagram and is used to schedule program launch or adjust parameters in the settings menu. If you only see options from 0 to 3 with the Time Delay button, it corresponds to the wash program scheduling functionality (delaying the wash by 3, 6, or 9 hours), not the water hardness setting. Ensure you are in the correct settings menu.
3. Press the Programme button repeatedly until the salt indicator flashes. The salt indicator (often represented by a specific icon) is on your control panel screen and warns when the reservoir needs to be refilled. If you are seeing P1 or P3, you are likely in the interior lighting configuration menu (P1 for activated, P3 for deactivated), not the water hardness setting. Make sure the salt indicator is flashing.
4. Use the Time Delay button to adjust the hardness level (from 0 to 5) according to the table provided in the manual.
5. Press the On/Off button to save your configuration. Note: If your water is soft (below 13 °dF), the use of salt is not necessary.