Whirlpool TDLR6235FR/N Lave linge top Owner's Manual

PDF
Document
Whirlpool TDLR6235FR/N Lave linge top Owner's Manual | Fixfr
/

User questions

F A

Jennifer F.

How to remove a drum blade to retrieve an object from the tub?

No votes
  1. Unplug the washing machine and remove all laundry. 2. Close the drum flaps and turn the drum half a turn. 3. Using a screwdriver, press the plastic end of the blade while sliding it from left to right; it will fall into the drum. 4. Open the flaps to access the bottom of the tub through the opening. 5. To reinstall, place the blade over the hole on the right side of the drum and slide it from right to left until it clicks. Rotate the drum to check the anchor points before reconnecting the device.
F A

Jennifer F.

How to remove a component inside the washing machine drum to retrieve a lost object?

No votes

To check for and retrieve an object that has fallen between the drum and the tub, you can remove one of the plastic blades (aubes) inside the drum. First, unplug the washing machine and remove all laundry. Close the drum flaps and rotate the drum half a turn. Using a screwdriver, press on the plastic end of the blade while sliding it from left to right with your hand; it will then drop into the drum. Open the drum to access the opening and retrieve your object. To reinstall the blade: position the plastic tip above the hole on the right side of the drum, then slide it from right to left until it latches into place. Close the flaps, turn the drum half a turn to ensure the blade is securely fastened at all anchor points, then plug the appliance back in. Additionally, check the water filter (drain pump) located behind the cover at the bottom of the machine, as small objects are often stopped there.

F A

Jennifer F.

How to remove the plastic blade (lifter) from the washing machine drum to retrieve items trapped in the tub?

No votes

Unplug the washing machine and empty the drum. Close the drum flaps and rotate the drum half a turn. Using a screwdriver, press the plastic end and slide the blade from left to right; it will fall into the drum. Open the drum to retrieve the object. To reinstall, position the plastic point over the hole on the right side of the drum, slide it from right to left until it clicks, and rotate the drum to verify attachment.

F A

Jennifer F.

How to remove the plastic drum vane to retrieve an object trapped between the drum and the tub of a washing machine?

No votes

To access the tub, unplug the machine, remove the laundry, and close the drum flaps. Rotate the drum half a turn and use a screwdriver to press the plastic end of the vane while sliding it from left to right until it falls inside. After retrieving the object through the opening, reinstall the vane by positioning the plastic tip over the hole on the right side and sliding it from right to left until it clicks.

F A

Jennifer F.

How to remove the plastic blade from the washing machine drum to retrieve an object fallen between the drum and the tub?

No votes

Unplug the machine and empty the drum. Close the drum flaps and rotate the drum half a turn. Use a screwdriver to press the plastic end of the blade while sliding it from left to right; the piece will fall inside the drum. To reinstall, place the plastic tip over the hole on the right side and slide it from right to left until it clicks into place.

F A

Jennifer F.

How to remove the plastic blade from the washing machine drum to retrieve a lost item (e.g., a sock)?

No votes

To remove the plastic blade (aube/lame) from the drum to retrieve a lost object:

  1. Unplug the washing machine and remove all laundry from the drum.
  2. Close the drum flaps and turn the drum halfway.
  3. Using a screwdriver, press the plastic end while sliding the blade from left to right with your hand; it will then fall inside the drum.
  4. Open the drum flaps: you can now access the bottom of the tub through the opening and retrieve your item.
  5. To reinstall the blade: position the plastic tip above the hole on the right side of the drum, then slide it from right to left until it latches.
  6. Close the flaps, turn the drum halfway to ensure the blade is securely fixed at all its anchor points, then plug the appliance back in. Additionally, check the water filter (drain pump) located behind the bottom cover of the machine, as small items are often caught there.
Preparing document for printing…
0%