Miele G 5072 Vi Lave vaisselle tout intégrable Owner's Manual

PDF
Document
Miele G 5072 Vi Lave vaisselle tout intégrable Owner's Manual | Fixfr
/

User questions

P E

John P.

What causes standing water in a dishwasher and how to resolve it?

Standing water can be caused by a clogged filter assembly, a blocked drain pump, or a kinked drain hose. To resolve it, switch off and unplug the dishwasher, remove the filter assembly, manually scoop out the water, clean the drain pump area, and check the drain hose. Unplugging the dishwasher will not automatically drain the water.

P E

John P.

What do error F11 and standing water in the dishwasher tub indicate, and how can the water be evacuated?

Error F11 is associated with a water inlet fault, but the code display may be partially illegible and its exact link to drainage cannot be confirmed. Standing water at the end of a programme indicates a drainage problem: clean the filter combination, check the drain pump for a blockage, and check that the drain hose is not kinked or looped. Unplugging the appliance does not evacuate the water. For safety, switch off and unplug the appliance, remove the filters, scoop out the water with a small container, open the drain pump cover and remove any foreign objects, check the drain hose, then refit the cover and filters. Also check the water inlet: tap fully open, inlet filter clean, pressure at least 50 kPa (0.5 bar).

P E

John P.

What should be checked for an F11 water-inlet error and stagnant water in a dishwasher?

For F11, open the water tap fully, restart the programme, clean the inlet filter, ensure water pressure is at least 50 kPa (0.5 bar), and check that the drain hose is not kinked. For stagnant water, disconnect power, remove the filters, scoop out the water, clean the drain pump and check the drain hose. Unplugging alone does not drain the water.

Preparing document for printing…
0%