Oglo# Loops 4 Noir Enceinte Bluetooth Product fiche

To use the auxiliary connection, simply plug an external audio device into the 3.5 mm jack input. No additional configuration is required to start playback.

The speaker uses Bluetooth 4.2 technology and can memorize up to 8 devices, though only one device can be connected at a time within a 10-meter range. Pairing typically occurs automatically upon power-up or via a dedicated button.

The Loops 4 portable speaker offers three sound input options: Bluetooth 4.2 wireless connection (10-meter range), auxiliary input via 3.5mm jack for external devices, and a USB playback port for music from a USB stick (max 32GB, formatted in FAT32 or exFAT). The manual does not specify how to switch between sources.

No, it is not necessary to "force" playback via the jack input on the Loops 4 speaker. Simply connect an external device to the auxiliary input (3.5mm jack) to activate this connection.

The Loops 4 speaker uses Bluetooth 4.2 technology and can memorize up to 8 devices. It allows simultaneous connection with only one device at a time, within a 10-meter range. The manual does not provide the exact procedure to activate pairing mode.

The Loops 4 portable speaker offers three sound input options: wireless Bluetooth 4.2 connection (10-meter range), auxiliary input (3.5mm jack) for external audio devices, and a USB playback port for removable media (USB drive up to 32 GB, formatted in FAT32 or exFAT).

To use the auxiliary input of the Loops 4 speaker, simply plug your external audio device via a 3.5mm jack cable into the dedicated input.

The Loops 4 speaker uses Bluetooth 4.2. It can remember up to 8 Bluetooth-enabled devices, but can only connect to one device at a time. The connection range is 10 meters.

L'enceinte portable Loops 4 de la marque OGLO propose trois options pour l'entrée sonore : connexion sans fil Bluetooth 4.2 (portée 10m), entrée auxiliaire (jack 3.5mm pour appareils externes), et port USB de lecture (pour clé USB max 32 Go, FAT32/exFAT). Le manuel ne détaille pas la procédure exacte pour basculer entre les sources.

Pour utiliser l'entrée auxiliaire (jack 3,5 mm) de l'enceinte Loops 4, il suffit de brancher directement votre appareil externe avec un câble jack/jack 3,5 mm. Aucune action supplémentaire n'est nécessaire pour « forcer » la lecture.

L'enceinte Loops 4 utilise la technologie Bluetooth 4.2. Elle peut mémoriser jusqu'à 8 appareils Bluetooth, mais ne peut connecter qu'un seul appareil à la fois, avec une portée de 10 mètres. Le manuel ne précise pas la manipulation exacte pour activer le mode appairage.

The Loops 4 portable speaker offers three audio input options: Bluetooth 4.2 (wireless, up to 10 meters, connects one device at a time, remembers up to 8), Auxiliary input (3.5mm jack for external devices), and USB playback port (for USB drives up to 32GB, FAT32/exFAT). The manual does not specify the exact procedure to switch between these sources.

To use the auxiliary jack input on the Loops 4 speaker, simply plug your external audio device into the 3.5mm auxiliary input. No special action is required to 'force' playback.

The Loops 4 speaker uses Bluetooth 4.2. It can remember up to 8 Bluetooth-enabled devices but connects to only one at a time, with a range of up to 10 meters. The manual does not detail the exact procedure to activate pairing mode.