AEG BPE435020M Manuel utilisateur

PDF
Document
AEG BPE435020M Notice d'utilisation + Chat IA & PDF | Fixfr
/

User questions

F S

Linda F.

How to prepare for and start a pyrolysis cleaning cycle?

Ensure the oven is cold, remove all accessories and side supports, and clean major spills. Turn the cooking mode knob to the Pyrolysis function and select the cleaning intensity using the thermostat knob (P1 for 1.5 hours or P2 for 3 hours). Press the clock button to start the cycle.

F S

Linda F.

Why does the oven door not lock immediately at the start of a pyrolysis cycle?

The door locks automatically only once the oven reaches a specific internal temperature. Once the cleaning cycle is finished, the door will remain locked until the oven has cooled down sufficiently.

F S

Linda F.

How to prepare and launch a pyrolysis cleaning cycle in the oven?

Before starting pyrolysis: 1. Turn off and cool the oven. 2. Remove all accessories (racks, plates) and removable rack supports by pulling the front away from the side wall, then detaching the rear. 3. Clean major dirt from the oven sole and inner door with warm water, a soft cloth, and neutral detergent. To launch: 1. Turn the cooking mode knob to Pyrolysis. 2. Turn the thermostat knob to select intensity: P1 (light, 1h30) or P2 (normal, 3h). 3. Press the clock button to start. 4. After completion, return the mode knob to Off. The door locks automatically when hot and unlocks when cool. Wipe ashes afterward.

F S

Linda F.

What indicators represent the pyrolysis function on the oven?

The pyrolysis function is directly indicated by the term "Pyrolysis" on the cooking mode knob. On the display, "PYR" flashes for 10 seconds after starting or stopping to remind you to perform a cleaning. "P1" / "P2" symbolize and allow selecting the cleaning intensity (P1 for light, 1h30; P2 for normal, 3h).

F S

Linda F.

Is it normal for the oven door to not lock immediately when pyrolysis starts?

Yes, it is normal. The door locks only when the oven reaches the set temperature. If the program has just started, the lock will activate automatically once the cavity is sufficiently hot. After cleaning, the door remains locked until the oven has cooled. If the door never locks, ensure it is well closed and check for error codes (e.g., C3 or F102) which could indicate a malfunction.

F S

Linda F.

How to prepare for and start the pyrolysis cleaning cycle, and why might the door not lock immediately?

Before starting, remove all accessories and side grid supports (pull the front then the back to detach). Clean major spills manually. Select the 'Pyrolysis' mode and choose intensity P1 (1h30) or P2 (3h), then press the clock button. The door locks automatically only when the oven reaches a specific temperature; it will remain locked until the oven cools down.

F S

Linda F.

How to prepare and launch the pyrolysis cleaning cycle?

Remove all accessories and grid supports (pull the front then the back of the support to detach). Clean large residues from the cavity. Select the Pyrolysis mode on the dial, choose the intensity (P1 for 1.5h, P2 for 3h) on the thermostat, and press the clock button to start.

F S

Linda F.

Why does the oven door not lock immediately when starting the pyrolysis cycle?

The door only locks once the oven reaches a specific temperature. It will remain locked after the cycle until the oven has cooled down sufficiently.

Preparing document for printing…
0%