Bauknecht WTCH 6930 CH/N Washing machine Manuel utilisateur

PDF
Document
Bauknecht WTCH 6930 CH/N Washing machine Manuel utilisateur | Fixfr
/

User questions

I Y

Michael I.

How to troubleshoot common issues with the washing machine?

No votes

If you encounter a problem with your washing machine, please consult the following troubleshooting steps based on the symptom:

  • The appliance does not start: Check that the plug is properly connected, that there is no power failure, that the lid is properly closed, and that the 'Key Lock' function is not activated. Make sure you have pressed the 'Start/Pause' button, that the water tap is open, and that no 'delayed start' is programmed.
  • The cycle stops during operation: Check if the program has been modified or if the 'Hydrostop' option is activated.
  • Excessive vibrations: Ensure the machine is level and that the transport support has been correctly removed.
  • Laundry too wet after spinning: This is often due to an unbalanced load (favor larger loads) or a spin speed set too low.
  • Anomaly code (e.g., F-02) or 'Call Service' light: Turn off the machine, unplug it, wait approximately 1 minute, then turn it back on. If the problem persists, contact After-Sales Service.
  • 'Blocked Water Filter' light: Wastewater is not being drained; you must clean the water filter.
  • 'No Water' light: Check that the water supply is sufficient. For more detailed instructions on cleaning the filter, refer to the 'MAINTENANCE AND CLEANING' section of the document.
I Y

Michael I.

What are the troubleshooting steps for common washing machine problems?

No votes

For issues with the washing machine:

  • Appliance not starting: Verify the plug is connected, no power outage, the lid is closed, "Key Lock" function is off, "Start/Pause" button has been pressed, the water tap is open, and no "delayed start" is programmed.
  • Cycle stops mid-progress: Check if the program was changed or if the "Hydrostop" option is activated.
  • Excessive vibrations: Ensure the machine is level and the transport support has been correctly removed.
  • Laundry too wet after spinning: This is often due to an unbalanced load (favor larger loads) or a too low spin speed setting.
  • Anomaly code (e.g., F-02) or "Call SAV" light: Turn off the machine, unplug it, wait approximately 1 minute, then turn it back on.
  • "Clogged water filter" light: The wastewater is not drained; you must clean the water filter.
  • "No water" light: Verify that the water supply is sufficient.
I Y

Michael I.

How to troubleshoot common issues with the washing machine?

No votes

To troubleshoot common issues with a washing machine, consult the following steps based on the symptom:

  • The appliance does not start: Check that the plug is correctly inserted, there is no power outage, the lid is securely closed, and the "Key Lock" function is not activated. Ensure you have pressed the "Start/Pause" button, that the water tap is open, and no "delayed start" is programmed.
  • The cycle stops mid-progress: Check if the program was changed or if the "Hydrostop" option is activated.
  • Excessive vibrations: Ensure the machine is level and that the transport support has been correctly removed.
  • Laundry too wet after spinning: This is often due to an unbalanced load (favor larger loads) or a spin speed set too low.
  • Anomaly code (e.g., F-02) or "Call Service" light: Turn off the machine, unplug it, wait approximately 1 minute, then turn it back on. If the problem persists, contact After-Sales Service.
  • "Clogged water filter" light: Wastewater is not draining, you must clean the water filter.
  • "No water" light: Check that the water supply is sufficient.
Preparing document for printing…
0%