Oventrop 1013066 vindo TH Thermostat Manuel du propriétaire

PDF
Document
Oventrop vindo TH : Notice d'utilisation + Chat IA | Fixfr
/

User questions

R B

Jennifer R.

How to remove a thermostatic head from a valve body?

No votes

Turn the manual handle counterclockwise until '5' is aligned with the mark. Position the head so the mark points upward or is clearly visible, then unscrew the thermostatic head using the M 30 x 1.5 coupling nut.

R B

Jennifer R.

How to remove the thermostatic head from the valve body?

No votes

Turn the manual handle counterclockwise to setting '5'. Align the head so the reference mark is visible or pointing upwards, then unscrew the M 30 x 1.5 coupling nut. Tighten the nut fully when reinstalling.

R B

Jennifer R.

How can the thermostatic head be removed when the internal pin is blocked?

No votes

No specific procedure for a blocked internal pin is described. To separate the head from the valve body, turn the manual handle anticlockwise until “5” is aligned with the mark so the pushrod is fully retracted, align the head mark so it is visible or pointing upward, then unscrew the head from the valve thread using an M30 x 1.5 coupling nut and tighten it fully when refitting. Do not force the handle or pin; if the pin does not return to position 5, replace the head.

R B

Jennifer R.

How can a thermostatic head be removed when its internal pin is stuck?

No votes

Turn the manual handle counterclockwise until the number 5 aligns with the reference mark, so the head pin is fully retracted. Align the head mark upward or make it visible, then unscrew the thermostatic head from the valve thread using an M30 x 1.5 coupling nut; tighten the nut fully when reassembling. Do not force the handle or pin. If the pin does not return to position 5, replacing the head is the safest solution.

Preparing document for printing…
0%