geminox NOVALITHE 40 C Manuel utilisateur

PDF
Document
GEMINOX NOVALITHE: Notice Technique + Chat IA | Fixfr
/

User questions

F V

Jennifer F.

What are the detailed steps for opening and cleaning the boiler heating body?

  1. Turn off the power and remove the front and side panels (front right and left). 2. Electrically disconnect the burner. 3. Unscrew the 4 firebox door screws and slide the door forward to extract the stainless steel firebox. Note: Close the fuel supply and water shut-off valves before starting.
F V

Jennifer F.

How to open and clean the boiler heat exchanger?

To open and clean the heat exchanger: 1. Preparation: Disconnect the power supply and remove the front and both side panels. 2. Disconnection: Electrically disconnect the burner from the boiler. 3. Access: Unscrew the four mounting screws of the firebox door, then slide it forward to open it along the hinge and extract the stainless steel firebox.

F V

Jennifer F.

How to open and clean the boiler heating body?

  1. Preparation: Power off the unit and remove the front and side panels. 2. Disconnection: Electrically disconnect the burner. 3. Hearth access: Unscrew the four fireplace door screws and slide it forward to open and extract the stainless steel hearth. Note: Ensure fuel and water valves are closed before starting.
F V

Jennifer F.

How to open and clean the heating body of the boiler?

Disconnect the power supply, remove the front and both side panels, and disconnect the burner electrically. Unscrew the four firebox door mounting screws, then slide the door forward to access the stainless steel firebox.

F V

Jennifer F.

How to open and clean the boiler's heating body?

  1. Turn off the power supply and remove the front and both side panels. 2. Disconnect the burner from the boiler. 3. Unscrew the 4 fixing screws on the hearth door, then slide it forward to extract the stainless steel hearth. Ensure the fuel supply and water valves are closed before starting.
Preparing document for printing…
0%