What are the consequences of running the dishwasher without water or regenerating salt?
If the water supply is closed, the 'Water Inlet / Drain' indicator will flash and the cycle will not start. If the machine is run without regenerating salt when water hardness is above 0.7 mmol/l, limescale deposits may form on the dishes and in the tub. A dedicated indicator light signals when the salt level is low.
What is the duration of the Quick 40°C program?
The duration is approximately 38 minutes when using cold water (15 °C) and approximately 30 minutes when using hot water (55 °C).
How to prepare a dishwasher for use after a long period of inactivity?
Clean the filters and the spray arm nozzles. Pour approximately 2 liters of water into the salt reservoir before adding regenerating salt, then immediately run a 'Quick' cycle empty. Refill the rinse aid, ensure the water tap is open, and check the power cables and hoses for damage.
What type of detergent should be used in the dishwasher?
Use only domestic dishwasher detergents in the form of powder, gel, or tablets. Do not use hand-washing liquids or professional-grade detergents.
What are the consequences of running the dishwasher without water or regenerating salt?
Running the device without water will cause a warning light to flash and prevent the cycle from starting. Operating without salt (unless the water hardness is very low) can lead to limescale deposits on the dishes and inside the machine.
What is the duration of the 40°C quick program?
The cycle duration is approximately 38 minutes with a cold water supply (15°C) or 30 minutes with a hot water supply (55°C).
How to prepare a dishwasher for use after a long period of inactivity?
Clean the filters and spray arm nozzles. Before adding regenerating salt, pour approximately 2 liters of water into the salt reservoir. Fill the rinse aid compartment and immediately run a quick cycle to rinse away any salt overflows.
Which types of detergent should be used?
Use standard household dishwasher detergents in powder, gel, or tablet form. Do not use hand-washing liquids or professional-grade detergents.
What are the consequences of operating the dishwasher without water or regenerating salt?
Without water, the appliance will detect an anomaly, a control light will flash, and the wash cycle will not proceed. Without salt, limescale deposits may form on the dishes and in the tub if the water hardness is above 0.7 mmol/l.
What is the duration of the quick wash program?
The Quick 40°C program lasts approximately 38 minutes with a cold water supply (15°C) and approximately 30 minutes with a hot water supply (55°C).
How to restart a dishwasher after a long period of inactivity?
Clean the filters and spray arm nozzles. Pour approximately 2 liters of water into the salt reservoir before adding the regenerating salt, then run an empty quick cycle. Refill the rinse aid and ensure the water supply and cables are in good condition.