Samsung WD90N645OOM Lavante-séchante QuickDrive 9+5kg - WD90N645OOM Manuel utilisateur

PDF
Document
WD90N645OOM Manuel Utilisateur : IA Chat & PDF | Fixfr
/

User questions

N J

Linda N.

How to resolve a temperature indicator failure or related error codes on a washing machine?

Ensure the appliance is properly powered and the circuit breaker is active. If error codes appear: HC indicates a heating control issue, UC indicates a voltage or electronic control error, and AC or AC6 indicates a communication error between electronic boards. Note that temperature fluctuations during filling are normal due to the automatic mixing of hot and cold water. To clear a code, try resetting the device by unplugging it for 2 to 3 minutes before restarting.

N J

Linda N.

How to troubleshoot a temperature indicator or display failure on a washing machine?

Verify the power supply and ensure the circuit breaker has not tripped. Check for specific information codes: HC indicates a heating control issue, UC indicates an overvoltage or electronic control error, and AC or AC6 indicates a communication error between electronic boards. Note that temperature variations during filling are normal due to automatic water mixing. To clear errors, perform a reset by unplugging the device for 2 to 3 minutes before restarting.

N J

Linda N.

How to troubleshoot a faulty temperature indicator or display error codes on the washing machine?

Verify the appliance is plugged in and the circuit breaker is active. Codes such as HC (heating control), UC (electronic control/voltage), or AC/AC6 (communication issue) indicate specific faults. For temporary errors, reset the device by unplugging it for 2 to 3 minutes. Note that temperature variations during filling are normal due to automatic water mixing.

N J

Linda N.

How to troubleshoot a temperature indicator failure or specific display error codes?

Check the power supply and circuit breakers. If specific error codes appear: HC indicates a heating control issue, UC indicates a voltage error, and AC or AC6 indicates a communication error between electronic boards. To reset, unplug the device for 2 to 3 minutes before restarting.

Preparing document for printing…
0%