Johnson JO 9.9 2 Stroke 2005 Manuel du propriétaire

PDF
Document
Johnson 9.9, 10, 15 Moteur Hors-Bord : Guide AI & PDF | Fixfr
/

User questions

L T

John L.

How to check and fill the gearcase (lower unit) lubricant of a 2005 Johnson engine and what is its capacity?

No votes

To check and fill the gearcase (lower unit) lubricant of the 2005 Johnson engine: 1. Verification: The engine must be in its normal operating position. Remove the lubricant level plug. If necessary, add lubricant until it is visible at the opening. 2. Filling: Remove the drain/fill plug and the level plug to completely drain the old lubricant. Insert a lubricant tube into the drain/fill opening and fill slowly until the lubricant comes out of the level opening. Replace the level plug before removing the fill tube, then close the drain plug. Use only Ultra-HPF™ lubricant. The capacity is 260 ml (9 fluid oz).

L T

John L.

How to check and fill the gearcase lubricant?

No votes

To check: Place the motor in the normal operating position and remove the level plug to inspect the lubricant. To fill: Remove both the drain/fill plug and the level plug to empty the old lubricant. Inject Ultra-HPF™ lubricant through the drain hole until it flows out of the level hole. The total capacity is 260 ml (9 fl oz).

L T

John L.

How to check and fill the gearcase lubricant on a boat motor?

No votes

With the motor in its normal operating position, remove the level plug to inspect the lubricant. To refill, remove both the drain/fill plug and the level plug, then inject Ultra-HPF™ lubricant through the drain hole until it flows out of the level hole. Reinstall the level plug before removing the fill tube, then close the drain plug. The capacity is 260 ml (9 fl oz).

L T

John L.

How to check and fill the gear case lubricant on a Johnson 2005 engine?

No votes

With the engine in its normal operating position, remove the level plug to inspect the lubricant. To refill, remove the drain/fill plug and the level plug to empty the old oil, then inject Ultra-HPF lubricant into the drain hole until it exits the level hole. The capacity is 260 ml (9 fl oz).

L T

John L.

How to check and fill the gearcase lubricant in a Johnson 2005 engine?

No votes

Position the engine normally and remove the level plug to check. To fill, remove both the drain and level plugs, inject lubricant (Ultra-HPF™) through the drain hole until it exits the level hole, then replace the level plug before removing the tube and closing the drain plug. The capacity is 260 ml (9 fl oz).

Preparing document for printing…
0%