Honeywell Galaxy Dimension TouchCenter Mode d'emploi

PDF
Document
Galaxy Dimension : Guide d'utilisation + Chat IA | Fixfr
/

User questions

N B

John N.

How to consult and acknowledge a system fault or tamper alert?

No votes

To view a fault, enter the PIN and press 'ent', then use the navigation keys. To acknowledge the fault, the underlying cause must be resolved, an authorized PIN must be entered, and the conditions must be viewed on the display. For EN50131 Grade 3 systems, an installer PIN is often required. If authorized, a fault can be temporarily inhibited during arming by pressing 'ent' when 'CONFIRM. SET' appears.

O B

Robert O.

What is the procedure to reset system faults and tamper alerts?

No votes

To reset alerts, first eliminate the cause of the fault. Then, enter an authorized PIN code and view the fault conditions on the keypad display. Note that for systems compliant with the EN50131 Grade 3 standard, an installer PIN code is typically required to complete the acknowledgement.

N B

John N.

How to consult and acknowledge a system fault or tampering alert?

No votes

To consult a fault, enter the PIN and press 'ent', using the navigation keys to browse. To acknowledge, the cause of the fault must be eliminated, an authorized PIN must be entered, and the conditions must be viewed on the display. On systems compliant with EN50131 Level 3, an installer or manager code may be required. If a fault cannot be cleared, it may be inhibited during the arming process by pressing 'ent' when the confirmation message appears.

O B

Robert O.

How to acknowledge system faults and tampering alerts?

No votes

Eliminate the cause of the fault, enter an authorized PIN, and review the conditions on the keypad display. For systems compliant with EN50131 Level 3, an installer PIN is often required to complete the acknowledgment.

N B

John N.

How to manage and acknowledge system faults or tamper alerts on the keypad?

No votes
  1. View: Enter the PIN and press 'ent', then use the navigation keys to scroll through faults. 2. Acknowledge: Eliminate the cause of the fault, enter an authorized PIN, and view the conditions on the screen. 3. Inhibit: If a fault cannot be cleared, it may be inhibited for a single arming cycle by pressing 'ent' when the 'CONFIRM. SETTING' message is displayed.
O B

Robert O.

How to reset system alerts and faults?

No votes

To acknowledge faults, eliminate the cause, enter an authorized PIN, and view the fault conditions on the keypad display.

N B

John N.

How to consult and reset a system fault or tamper alert?

No votes

To view a fault, enter the PIN and press 'ent', then use the navigation keys to browse. To reset the system, the cause of the fault must be eliminated, an authorized PIN must be entered, and the conditions must be viewed on the display. For Level 3 systems, an installer code may be required. A fault can be inhibited for a single commissioning session by pressing 'ent' when 'CONFIRM. MES' is displayed.

O B

Robert O.

What is the procedure for acknowledging system faults?

No votes

To acknowledge a fault, resolve the physical cause of the issue, enter an authorized PIN, and review the status message on the keypad screen. High-security systems (Level 3) typically require an installer or manager PIN for this procedure.

N B

John N.

How to manage a system fault or tamper condition?

No votes

To view faults, enter the PIN and press 'ent', then navigate using the 'A >' and '< B' keys. To clear the alert, the cause must be resolved and a valid PIN entered. On EN50131 level 3 systems, an installer code might be necessary. If a fault cannot be cleared, it may be possible to inhibit it for a session by pressing 'ent' when 'CONFIRM. MES' is displayed.

O B

Robert O.

What is the procedure to acknowledge a system fault?

No votes

The procedure requires eliminating the cause of the fault, entering an authorized PIN code, and viewing the fault conditions on the keypad screen. For level 3 compliant systems, an installer PIN is generally required for the final reset.

N B

John N.

How to consult and manage system faults or tampers?

No votes

To view faults, enter the PIN and press 'ent', using navigation keys to browse. To clear them, the cause must be removed, the conditions viewed on screen, and an authorized PIN entered. If a fault cannot be cleared, it may be possible to inhibit it for one setting period by pressing 'ent' when 'CONFIRM. SET' is displayed.

Preparing document for printing…
0%