Popcorn Hour A 110 Mode d'emploi

PDF
Document
Popcorn Hour A110 Guide Utilisateur : AI Chat & PDF | Fixfr
/

User questions

Y F

Michael Y.

How to connect a Popcorn Hour A110 to a PC via USB?

No votes

Connect the device using a USB cable. For disks formatted in Ext3, use a filesystem driver to assign a drive letter to the internal disk. For NTFS formatted disks, the device is recognized automatically, though this format prevents the installation of NMT applications.

Y F

Michael Y.

How to access a Popcorn Hour A110 via SMB?

No votes

Enter the device's IP address or hostname in the computer's 'Run' command (e.g., \). For easier access, you can map it as a network drive through the system's computer settings. The default credentials are 'nmt' for the user and '1234' for the password.

Y F

Michael Y.

How to connect and access the Popcorn Hour A110 from a computer?

No votes

For a USB connection, use the provided cable. If the internal drive is in Ext3 format, a driver must be installed to assign a drive letter; NTFS drives are recognized automatically but do not support NMT applications. For SMB network access, enter \ or \ in the Run command or map a network drive. The default credentials are 'nmt' for the username and '1234' for the password.

Y F

Michael Y.

How to connect a Popcorn Hour A110 to a PC?

No votes

To connect a Popcorn Hour A110 to a PC, there are two main methods depending on the disk format: 1. Via USB cable (Ext3 format): Install applications on the internal hard drive. Download and install the Ext2IFS_1_11.exe executable. Connect the PCH A110 to the PC with the provided USB cable, power it on, then use the IFS icon on the PC to assign a letter to the hard drive. 2. Via USB cable (NTFS format): Connect a hard drive formatted in NTFS. It will be automatically recognized by Windows without additional drivers. Note: NTFS formatting prevents the installation of NMT applications.

Y F

Michael Y.

How to access a Popcorn Hour A110 via SMB?

No votes

To access a Popcorn Hour A110 via SMB from a PC, follow these steps: 1. Click on Start then Run. 2. Enter \\<NMT Hostname> or \\<NMT IP ADDRESS> in the empty field. 3. For simplified future access, you can map a network drive: Go to Computer, then select Tools > Map network drive. Enter the device's address again. Right-click on the shared folder and choose Map network drive. The default credentials for the SMB server are: User: nmt, Password: 1234.

Y F

Michael Y.

How to connect a Popcorn Hour A110 to a PC via USB?

No votes

Connect the device using a USB cable and power it on. For Ext3 formatted disks, use a driver to assign a drive letter. NTFS formatted disks are recognized automatically, though this format prevents the installation of NMT applications.

Y F

Michael Y.

How to access a Popcorn Hour A110 via SMB?

No votes

Enter \ or \ in the Windows Run command. Use the default credentials: username 'nmt' and password '1234' to access the server.

Y F

Michael Y.

How can a Popcorn Hour A110 be connected to a PC?

No votes

There are two primary methods depending on the disk format:

  1. Via USB cable (Ext3 format): Applications are installed on the internal hard drive. It requires installing a specific executable (e.g., Ext2IFS_1_11.exe). After connecting the PCH A110 to the PC via USB and powering it on, use the appropriate icon on the PC to assign a drive letter to the hard drive.
  2. Via USB cable (NTFS format): A hard drive formatted in NTFS can be connected and will be automatically recognized by Windows without additional drivers. Note that formatting in NTFS prevents the installation of NMT applications. Network transfer solutions (SMB or NFS) are also available.
Y F

Michael Y.

How to access a Popcorn Hour A110 via SMB from a PC?

No votes

To access the Popcorn Hour A110 via SMB from a PC, open 'Start' then 'Run' and enter \\<NMT Hostname> or \\<NMT IP ADDRESS>. For simplified future access, a network drive can be mapped by going to 'Computer', then 'Tools' > 'Map network drive', entering the device's address, and right-clicking the shared folder to choose 'Map network drive'. The default credentials for the SMB server are: User: nmt, Password: 1234.

Y F

Michael Y.

How to connect a Popcorn Hour A110 to a PC via USB or SMB?

No votes

For USB connection, use the provided cable; if using Ext3 format, install Ext2IFS on the PC to assign a drive letter. For SMB network access, use the 'Run' command on the PC, enter the device's hostname or IP address, and log in with the default credentials (user: nmt, password: 1234). You can also map a network drive via the computer's tools menu.

Preparing document for printing…
0%