Dodge Nitro 2007-2012 Manuel du propriétaire

PDF
Document
Dodge Nitro : Guide d'Utilisateur 2010 | AI Chat & PDF | Fixfr
/

User questions

W K

James W.

What does the TPMS warning light indicate?

No votes

The tire pressure monitoring system (TPMS) warning light indicates that one or more of the tires are significantly under-inflated.

W K

James W.

What should be done when the TPMS warning light comes on?

No votes

Check the inflation pressure of each tire and inflate them to the pressure recommended for the vehicle. This information can be found on the 'Tire and Loading Information' label on the driver's side door opening.

W K

James W.

Can temperature changes affect the TPMS?

No votes

Yes, temperature changes can affect tire pressure and cause the TPMS light to illuminate. It may take up to 20 minutes of driving above 25 km/h (15 mi/h) for the light to turn off after the tire pressures have been properly adjusted.

W K

James W.

Will the TPMS light illuminate if a spare tire is used?

No votes

Yes, if the spare tire is used, the TPMS light may illuminate.

Q B

Patricia Q.

How to pair a phone and operate the hands-free communication system?

No votes

To pair a phone, press the Phone button, say 'uconnect setup', 'phone pairing', and 'pair a phone', then follow the prompts to set a PIN and priority. To make a call, press the Phone button and say 'dial' or 'call' followed by the contact name or number. Use the Phone button to answer or end calls, and adjust volume using the audio controls during a call or voice message.

Q B

Patricia Q.

How to operate the voice-activated phone system?

No votes

To pair a phone, press the Phone button, wait for the 'ready' prompt and beep, then say 'uconnect setup', 'phone pairing', and 'pair a phone'. Follow the voice instructions to set a four-digit PIN, name the pairing, and set a priority level. To make a call, press the Phone button, wait for the beep, and say 'dial' or 'call' followed by the name or number. Use the Phone button to answer or end calls, and adjust the volume using the radio controls or volume knob while the system is speaking or during a call.

Q B

Patricia Q.

How to operate the Uconnect phone system?

No votes

To use the hands-free communication system, follow these steps:

  • Pairing: Press the Phone button, wait for the 'ready' prompt and beep, then say 'uconnect setup', 'phone pairing', and 'pair a phone'. Follow the voice instructions to set a four-digit identification code, name the pairing, and set a priority level.
  • Placing a Call: Press the Phone button, wait for the beep, and say 'dial' or 'call' followed by the name or phone number.
  • Accepting or Ending a Call: Press the Phone button.
  • Adjusting Volume: During a call or while the system is speaking, use the vehicle's standard volume controls or the volume knob.
Q B

Patricia Q.

How to pair and operate the uconnect hands-free phone system?

No votes

To pair a phone, press the Phone button, wait for the 'ready' prompt, and use the voice commands 'uconnect setup', 'phone pairing', and 'pair a phone'. To place a call, press the Phone button and say 'dial' or 'call' followed by the name or number. Incoming calls are handled by pressing the Phone button, and volume is adjusted using the radio's volume controls.

Q B

Patricia Q.

How to pair a phone and use the Uconnect system?

No votes

To pair a phone, press the Phone button, say 'uconnect setup,' 'phone pairing,' and 'pair a phone,' then follow the voice prompts to set a PIN and priority. To make calls, say 'dial' or 'call' followed by the contact name or number. Adjust the volume using the standard controls or the volume knob during system voice prompts.

Preparing document for printing…
0%