Rain Bird SERIE ITC Manuel utilisateur

PDF
Document
Rain Bird SERIE ITC Manuel utilisateur | Fixfr
/

User questions

Z S

John Z.

How to set the time, date, and program automatic night triggering on a Rain Bird ITC programmer?

No votes

To reconfigure your Rain Bird ITC programmer, you have two options depending on the desired precision: Standard mode (simplified) or Turbo mode (more advanced).

1. Setting the clock and date

  • In Standard Mode: Press the ➔ key until the clock setting. Use +/ON and -/OFF for the hour, and the selection key for the day (1 for Monday, etc.).
  • In Turbo Mode: Hold down the Turbo key for 5 seconds. Access steps T1 (Year, month, date) and T2 (Time of day) for a complete setting.

2. Automatic programming (night triggering)

Once the clock is set, you can define your start times:

  • Go to the starts setting function (step III in Standard mode or T4 in Turbo mode).
  • Select the program (A, B or C) with the A/B/C key.
  • Use the +/ON and -/OFF keys to define the desired time for your night cycle.
  • Note: The programmer will automatically reorder the times chronologically. If the system is completely out of order and you wish to start from scratch, you can perform a reset by making contact between the two "RESET" pads on the electronic board, but beware: this will erase all your data.
Z S

John Z.

How to reconfigure the Rain Bird ITC series programmer (time, date, automatic trigger)?

No votes

To reconfigure the Rain Bird ITC series programmer, two modes are available: Standard (simplified) or Turbo (more advanced). 1. Setting time and date: - Standard Mode: Press the ➔ button until the clock setting. Use +/ON and -/OFF for the hour, and the selection button for the day. - Turbo Mode: Hold the Turbo button for 5 seconds, then access T1 (Year, month, date) and T2 (Time of day). 2. Automatic programming (night trigger): After setting the clock, go to the start times setting function (step III in Standard or T4 in Turbo). Select the program (A, B, or C) and set the desired trigger time with +/ON and -/OFF. The programmer automatically orders the times. A complete reset is possible by making contact between the "RESET" pads, but this will erase all data.

B S

Mary B.

How to set the automatic start times (départs) for the nozzles on the Rain Bird ITC Series programmer?

No votes

To set the automatic start times (départs) for the nozzles on a Rain Bird ITC Series programmer, the procedure varies depending on the mode: - In Standard Mode: Press the ➔ button until the start times setting function. Select the program (A/B/C) and set the time using +/ON and -/OFF. A second start time can be added by pressing the selection button. - In Turbo Mode: Press the ➔ button until step T4. Select the program (A, B, or C) and define the time using +/ON and -/OFF. Turbo mode allows up to 8 start times per day. Validate choices by pressing the ➔ button.

Z S

John Z.

How to set the time, date, and configure automatic night programming on a Rain Bird ITC series programmer?

No votes

To reconfigure a Rain Bird ITC series programmer, two modes are available: Standard (simplified) or Turbo (advanced).

  1. Setting the clock and date:
    • Standard Mode: Press the ➔ key until clock setting. Use +/ON and -/OFF for time, and the selection key for the day (1 for Monday, etc.).
    • Turbo Mode: Hold the Turbo key for 5 seconds. Access steps T1 (Year, month, date) and T2 (Time of day) for complete setting.
  2. Automatic programming (night trigger): Once the clock is set:
    • Go to the starts setting function (step III in Standard mode or T4 in Turbo mode).
    • Select the program (A, B, or C) with the A/B/C key.
    • Use the +/ON and -/OFF keys to define the desired time for the night cycle.
    • Note: The programmer will automatically reorder the times chronologically. If the system is completely out of adjustment and a fresh start is desired, a reset can be performed by making contact between the two 'RESET' pads on the electronic board. Be aware that this will erase all existing data.
B S

Mary B.

How to set automatic start times for irrigation zones on a Rain Bird ITC series programmer?

No votes

To set the start times for a Rain Bird ITC Series programmer, the procedure depends on the programming mode:

  • Standard Mode: Press the ➔ key until the start times setting function. Use the A/B/C key to select the desired program, then set the time with the +/ON and -/OFF keys. A second start time can be added by pressing the selection key and repeating the operation.
  • Turbo Mode: Press the ➔ key until step T4. Select the program (A, B, or C) with the A/B/C key, then define the time with +/ON and -/OFF. Turbo mode allows configuring up to 8 start times per day. Ensure to validate choices by pressing the ➔ key to proceed to the next step.
Z S

John Z.

How to configure time, date, and night programs on the ITC programmer?

No votes

Set the clock and date via the selection keys in either Standard or Turbo mode. To schedule a night start, access the 'starts' function (Step III or T4), select the program (A, B, or C), and define the desired start time.

B S

Mary B.

How to set automatic start times for nozzle irrigation?

No votes

Access the 'starts' function (Standard mode) or step T4 (Turbo mode), select the desired program (A, B, or C), and use the + and - keys to set the hour.

Preparing document for printing…
0%