What is the recommended tightening torque for the barrel of the Model 20 series rifle?
Le document indique que les vis de fixation du canon ne doivent pas être desserrées pour les fusils de la série de modèles 20. Toute intervention sur le canon, y compris un changement si nécessaire, ne doit être effectuée que par ANSCHÜTZ. Par conséquent, aucune valeur de couple de serrage n'est fournie pour le canon, car tout desserrage entraîne la perte de la responsabilité et de la garantie.
What is the recommended torque value for the barrel of Model 20 series rifles?
The document states that the barrel fixing screws must not be loosened for Model 20 series rifles. Any intervention on the barrel, including a change, must be performed only by ANSCHÜTZ. Therefore, no torque value is provided for the barrel, as any loosening results in the loss of liability and warranty.
What is the tightening torque for the barrel of Model 20 series rifles?
The document indicates that the barrel fixing screws must not be loosened for Model 20 series rifles. Any intervention on the barrel, including replacement, must only be performed by ANSCHÜTZ. Therefore, no tightening torque value is provided for the barrel, as any loosening results in loss of liability and warranty.